Modelaider Method Directions for Use

Modelaider Method Directions for Use

Fast simple in office model making for whitening trays mouth guards night guards aligners surgical guides snore and sleep devices and more.

Start directions Watch a demo Download Directions/Guides
Tips & Summary

Modelaider Method Tips ’n Tricks

These are high-level pointers to complement the full instructions. For the complete, step-by-step procedure, please download “Modelaider Method Directions for Use”.

1

Get comfortable with the workflow

This is a new technique, so expect a learning curve. Stay consistent and you’ll quickly see faster, cleaner, and more predictable results.

2

Stone amount per arch

A single-arch Modelaider with the Horseshoe cap (as shown in the video) typically requires about 100 grams of dental stone.

3

Measure

Follow the manufacturer’s powder-to-water ratio. As you gain experience, you can pour multiple Modelaiders from one mix.

4

Pour

Fill from one side and allow the mix to flow. Tip: Press the tray firmly on the vibrating machine to improve flow and minimize bubbles.

5

Set

Place the impression in the stand so the stone sets evenly. Separate at the time shown in the Dental Stone Comparison Table.

6

Finish

Remove any flash with a clipper and inspect margins before trimming.

Video Directions

Modelaider Method — Video Directions

Watch the full workflow for consistent, high-quality results.

Modelaider Stand Assembly Instructions

Quick setup for a stable, repeatable workflow.

Reference

Dental Stone Comparison Table *

FeatureSnap StonePrima RockBuff Stone
Hand Mix Time~30–45 seconds~60–90 seconds~60–90 seconds
Working Time~60–90 seconds~6 minutes~8 minutes
Separate Models After~3.5 minutes~12 minutes~15 minutes
# of Impressions Poured per Mix1–22–44–6
Compressive Strength~6,000 psi (wet, 1 hr);
~14,000 psi (dry, 48 hrs)		~8,000 psi (wet, 1 hr);
~17,000 psi (dry, 48 hrs)		~4,000 psi (wet, 1 hr);
~8,000 psi (dry, 48 hrs)
Expansion~0.15%~0.13%~0.15%
ISO TypeType IVType IVType III
Operator Skill LevelProIntermediateBeginner
Pick the stone that fits your skill set or call WhipMix at (800) 626-5651 for guidance.
*Use your current office modeling stone or consider one above.
Note: A single-arch Modelaider using the Horseshoe cap (as demonstrated in the video) typically requires approximately 100 grams of dental stone.
Quality and Safety Tips

Best Practices

  • Wear appropriate PPE (eye, face, dust protection, etc).
  • Weigh powder and water for consistent results; keep water temperature stable.
  • Ensure the impression tray is pressed firmly on the vibrating machine to help the stone flow and reduce voids.
  • Do not exceed the working time; plan your setup before mixing.
  • Clean trays and tools immediately after use to prevent residue build-up.
  • Store stone sealed and dry; label opened containers with the date.

© Modelaider. All rights reserved.

Sue, a passionate dental hygienist, created Modelaider to streamline impression pouring, eliminate trimming, and help dental professionals work faster, cleaner, & more efficiently. Follow us on social media below and share your experience.

Information

Contact Us

Privacy Policy

Terms of Service

🇺🇸 MADE in the USA ❤️🤍💙

Contact Us

Modelaider®

1415 Panther Lane, # 432

Naples, Florida 34109

[email protected]
‪(321) 222-3450‬

© Modelaider.com - All Rights Reserved - Terms & Conditions - 2025